Manual Code Entry; Automatic Code Search For Some Well-Known Brands; Automatic Code Search For All Brands - Ebode TAKE 6 IR+RF Guide Utilisateur

4.1. Manual code entry

Take your code book and search for the list matching the equipment you
are looking for, e.g. TV or DVR. Next, find the relevant brand (e.g. Sony). Now
you will find one or more 4-digit codes. If there is more than one code, it
depends on your equipment which code is correct. Generally, the codes
are displayed in order of age of the equipment. Older equipment first,
younger equipment at the end. Sometimes you will have to try several codes
before you find the right code for your equipment.
1. Make sure your equipment is switched on (for example TV).
2. Press and hold the S (8) key until the LED indicator lights continuously.
Release the S key.
3. Press and release the mode key (4) of the device you want to control (for
example TV).
4. Enter the 4-digit code from the Code Book by using the key pad (14). The
LED (2) turns off after the last digit is entered. If you entered a wrong code
the LED blinks for 3 seconds and then goes off. You have to repeat from step
2.
5. Point the remote in the direction of your TV and press the POWER button
(1). Your device should turn off. Check other functions (for example for a
DVR FF or REW, etc.). If certain functions are not responding, this indicates
that the entered code is not the correct one. In that case repeat the above
procedure with the next corresponding code of your brand.
6. Repeat this procedure from step 1 for the other equipment you want to
control (DVR, DVD, STB,...). If your equipment (TV, STB, etc....) does not
respond, try the other codes for your brand. If it still doesn't respond, try the
manual code search method (4.4 Manual code search).

4.2. Automatic code search for some well-known brands

If your brand is listed hereafter, you can use the brand search method (faster
than the "manual" and the "automatic code search").
Daewoo / JVC
/ Panasonic /
Sharp / Sony /
1. Turn on the device you want to control.
2. Press and hold S (8) until the LED indicator (2) lights steadily. Release S
button.
3. Press the mode button (4) that matches the equipment you wish to
control. The LED (2) blinks once.
4. Enter the code corresponding to your brand, point the TAKE 6 Remote in
the direction of your equipment, press CHAN+ (6) once only. Continue to
point the TAKE 6 Remote at your equipment until the equipment changes
Channel (the remote control sends an IR signal every second. Please wait
until your equipment reacts). When your equipment does react, press on the
key -/-- (13) to confirm. If you accidentally miss the code, you can stop the
autosearch by pressing CHAN- (6) and by repeatedly pressing this key return
to the right code. Press -/-- (13) to confirm.
Remark: if some functions of your equipment don't work, you need to try
another code for your brand. The search function starts after the last
confirmed code. For example, if it was 030, the search function starts at 031,
and it will keep on trying until the last possible code.

4.3 Automatic code search for all brands

When searching an unknown code, you can step through the library
automatically (AutoSearch). When your equipment responds, you can stop
the searching process and store the code you found.
16-10-2009
BRAND CODE
Philips /
Radiola
Akai /
Toshiba
Brandt /
Thomson
BRAND
Telefunken / Saba
1
/ Normende
Grundig /
2
Blaupunkt
3 Nokia / ITT
7
CODE
4
5
6
033000=15301