After Use; Maneuvering & Storage Instructions - General 2000 DC-4 Manuel Du Propriétaire

MANEUVERING & STORAGE INSTRUCTIONS
HOW TO MANEUVER YOUR FLOOR MACHINE:
1.) The machine is designed to operate in a straight forward walk method and NOT from side to side as
is a standard rotary floor machine. As you will notice, the wheels are in contact with the floor at all
times.
2.) The machine can be operated in a forward and backward motion when space or nature of area re-
quire same.
3.) NEVER OPERATE OR TURN ON MACHINE WHEN HANDLE IS IN VERTICAL POSITION.

AFTER USE

1.) Unplug the power cord from wall outlet.
2.) Remove the pad.
3.) Clean the power cord if needed and inspect it for cuts, gashes and loose prongs. Perform any re-
quired maintenance or repairs before storage.
4.) Wrap the power cord around the handle bar and cable hook.
5.) Wipe the entire machine with a clean, damp cloth. Wipe the underside of the apron housing after wet
use.
6.) Store the machine in a clean, dry place.
2000 DC-4
Page 11