Tripp-Lite DWM2655M Mode D'emploi page 4

1a. Mount on Wood Stud Wall
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
14-05-106-933355.indb 4
1
Find and mark the exact location of
X
D6 Washer
Anchor Bolt
WARNING
4
2
mounting holes
3
Drill pilot holes
Screw the wall
mount onto
the wall
5/13/2014 3:25:12 PM