Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Warning!
Do not leave the appliance switched on
continuously for more than one minute.
Do not switch on the appliance when the
blending mug (7) is empty.
Make sure that the motor unit (4) and the
blending attachment (6) do not come into
contact with water or other liquids.
The blending mug (7) and the lid (8) are
not suitable for use in the microwave.
•
Mount the blending attachment (6) to the
motor unit (4) by turning it
counterclockwise until it clicks into place.
•
Put the ingredients into the blending mug
(7).
•
Insert the mains plug into the wall socket.
•
Place the blending mug (7) onto the lid (8)
on a stable and flat surface.
•
Place the blending attachment (6) into the
blending mug (7). Make sure that the
accessory is located in the ingredients.
•
Use the inching switch (1) to test whether the
appliance blends the ingredients properly.
•
To switch on the appliance, keep the on/off
button (2/3) pressed.
•
Move through the ingredients with a gentle
upanddown movement. The appliance
blends the ingredients in a few seconds.
The longer the appliance is switched on,
the finer the ingredients will be blended.
•
To switch off the appliance, release the
on/off button (2/3).
•
Remove the mains plug from the wall socket.
•
Allow the appliance to cool down
completely.
•
Remove the blending attachment (6) from
the blending mug (7).
•
Remove the blending attachment (6) from
the motor unit (4) by turning it clockwise.
•
Place the lid (8) onto the blending mug (7)
until you use the ingredients for further
food processing.
Chopping applications
The chopping attachment (9) can be used for
chopping meat (raw and cooked), vegetables,
fruits (fresh and dried), nuts, herbs, spices, etc.
Warning!
Do not leave the appliance switched on
continuously for more than 10 seconds.
Do not switch on the appliance when the
chopping container (11) is empty.
Make sure that the motor unit (4) and the
chopping attachment (9) do not come into
contact with water or other liquids.
The chopping container (11) and the lid (12)
are not suitable for use in the microwave.
•
Mount the chopping attachment (9) to the
motor unit (4) by turning it
counterclockwise until it clicks into place.
•
Place the chopping container (11) onto the
lid (12) on a stable and flat surface.
•
Place the chopping blade (10) into the
chopping container (11).
•
Cut the food into pieces. Make sure that the
pieces of food fit in the chopping container
(11).
•
Put the ingredients into the chopping
container (11).
•
Insert the mains plug into the wall socket.
•
Place the chopping attachment (9) onto
the chopping container (11).
•
Use the inching switch (1) to test whether
the appliance chops the ingredients
properly.
•
To switch on the appliance, keep the on/off
button (2/3) pressed.
•
Firmly hold the appliance during the process.
The appliance chops the ingredients in a
few seconds. The longer the appliance is
switched on, the finer the ingredients will
be chopped.
•
To switch off the appliance, release the
on/off button (2/3).
•
Remove the mains plug from the wall socket.
•
Allow the appliance to cool down
completely.
•
Remove the chopping attachment (9) from
the chopping container (11).
•
Remove the chopping blade (10) from the
chopping container (11).
•
Remove the chopping attachment (9) from
the motor unit (4) by turning it clockwise.
•
Place the lid (12) onto the chopping
container (11) until you use the ingredients
for further food processing.
12
Publicité
Table des Matières
