Technical Data; Intended Use; Safety Instructions - Protool GMP 145 Guide D'utilisation

Technical data

Type reference
Mortising depth
with 100 mm chain cutting tool
with 150 mm chain cutting tool
Weight
Operating controls & Description
1. Base plate
2. Guide arm with scale
3. Screw with inner-hexagon head
4. Hexagon nut
5. Depth adjustment ring
6. Fixing screw
The accessories shown or described in this Operating
Manual may not be included as a part of delivery.

Intended use

This guide frame is intended to be used with the chain
mortiser CMP 150 installed. The guide frame is designed
for cutting precise perpendicular mortices in solid wood.
The user is solely liable for damage and accidents caused
by improper use of the product.
For safe work with the electric tool and prevention of injury,
it is imperative to follow all generally accepted safety
principles and regulations for prevention of accidents,
and read the enclosed „Safety instructions" thoroughly.
The manufacturer disclaims liability for damages caused
by unauthorized modifications or using other than the
supplied or specified accessories with the tool.

Safety instructions

This tool may only be used, maintained and repaired
by the people who have received the relevant
instructions. These people must have reached
the minimum age legally required. For safe work
and familiarizing with all the remaining risks, they must
have read and understood this Operating Manual.
1. For maximum safety of work with this tool, read
this Operating Manual carefully and observe all
the instructions given herein.
2. Follow the safety instructions supplied separately
as a part of delivery with each tool.
3. The electric tools shall not be used in damp or wet
locations, outdoors in the presence of rain, fog, snow,
or if there is a risk of fire or explosion.
4. Check the power supply cord and plug before each
use of the electric tool. Have any defect repaired
by a professional service workshop.
GB
GMP 145
max. 95 mm
max. 145 mm
4,8 kg
5. Remove plug from the mains before performing any
work on the electric tool.
6. Only insert plug in the mains socket when the electric
tool is switched off by the mains switch. Always keep
the power supply cord back away from the tool while
working and allow the cord to move freely in the
whole working area to make trouble-free work possible.
7. When working outdoors, use exclusively the extension
cords and cable connectors attested for outdoor use.
8. The electric tool shall always be used with the safety
guard mounted in proper position.
9. Use correctly adjusted and perfectly sharpened chain
cutting tools only. Replace damaged cutter chains
or guide rails immediately.
10. Beware of metal particles in wood coming in contact
with the cutters. Danger of damage to cutting tools
or the electric tool.
11. Secure work in a safe position with enough support
for a workpiece and the electric tool.
12. Whenever possible, the electric tool should be connected
to the mains via a fault current circuit breaker (Fl) or
a PRCD safety device.
13. Always keep the power supply cord in a safe distance
from the cutting tool during work.
14. After the work is finished, only put the electric tool
aside after the cutting tool has come to a complete
standstill.
15. Keep hands away from the chip discharge channel.
If the channel is blocked, first the electric tool must
be switched off and allowed to come to a complete
standstill. After that, the chips may be removed.
16. Damaged power supply cords must be replaced
immediately by a specialist.
17. Unauthorized use of this product anyway may lead
to a personal injury.
18. Repairs shall be carried out by the qualified
personnel only.
19. Use only the original spare parts.
20. Use safety glasses and ear protection.
8