CABLE CLIPS
1
Fasten the power cable to the handle
15
with the cable clips 4.
COLLECTION BAG
1
Lift the safety flap
5
lection bag
12
to the mower. Lower the
flap again.
Caution! Wait until the blade has
come to a complete stop before
opening the safety flap.
SWITCHING ON
1
In order to switch on the appliance,
plug in and push the release key
the right and hold it. Lift the on/ off trig-
1
towards the handle 15. The key
ger
snaps in and stays locked until the on/
off trigger is released.
CUTTING HEIGHT
1
Pull out the height adjustment lever
10
and move it to the desired cutting
depth.
Caution! Make sure the appliance is
switched off.
REPLACING THE BLADE
1
Loosen the fastening
move the worn blade.
Caution! Switch off and remove the
batteries first. Always use protective
gloves.
2
level.
and attach the col-
2
2
2
to
switching on the appliance again.
screw A
and re-
2
BATTERIES
Lift the battery cover
7
and push in two
charged batteries until they click into
place.
Caution! Make sure the batteries
are always charged to the same
FILLING INDICATOR
The collection bag
12
provides a filling
indicator 3:
Collection bag empty: Flap floats
Collection bag full: Flap falls down
SWITCHING OFF
To switch off the appliance, release the
on/ off trigger 1. The release key
engages automatically.
Caution! Wait until the blade has
come to a complete stop before
Insert new blade with the inscription
"GRASS SIDE" showing away from the
motor. Tighten the fastening screw A.
2
dis-
EN
119