ALARM 1 SETTING
1. Keep the unit in STANDBY OFF mode.
2. Press and hold the
3. Press │◄ ◄ button to set the desired alarm hour.
4. Press ►►│ button to set the desired alarm minute.
5. Press
alarm sound (Buzzer/FM).
6. Then press the
ALARM 2 SETTING
Process is the same as Alarm 1 setting. But press the
SNOOZE FUNCTION
If you want to snooze a few more minutes, pressing the SNOOZE button will deactivate the alarm
sound for 9 minutes.
SHUT OFF ALARM
1. When alarm goes on, press the STANDBY button to turn off alarm. The alarm will reset for
next day (24 hours later).
2. To turn off the alarm completely (not reset for next day), press the
repeatedly until the
DIMMER FUNCTION
In normal status (not in alarm status), press and hold the SNOOZE/DIMMER button to set the
brightness level of the LED segments as desired.
RADIO OPERATION
Press STANDBY button to turn on the unit.
1.
2.
Press the FUNC button repeatedly until the FM frequency will appear on the display.
To search for the previous/next available radio station, press and hold the │◄ ◄ or ►►│
3.
buttons until the displayed frequency starts running, then release the button. (When a radio
station is found, the frequency on display will stop running and start playback automatically).
To stop during searching, press the │◄ ◄ or ►►│ button again. (If reception is not good,
press the │◄ ◄ or ►►│ button repeatedly to fine tune).
4.
Adjust the volume to the desired level by pressing
5.
When finished listening, press the STANDBY button to turn the unit to off (standby) mode.
button,
button again, then press the │◄ ◄ button or the ►►│ button to choose the
button to confirm, the
/
indicators disappear.
indicator and LED will blink on the display.
indicator will light up.
button instead of
or
or
button
button.
button
3