Wireless Turbo Multi-Function Access Point Installation; Prepare For Installation - U.S.Robotics R24.0442.00 Guide D'installation

802.11g Wireless Turbo Multi-function Access Point

Prepare for installation

Turn on your desktop or laptop computer. Type your password if you are prompted to do so.
Note: Your product number is USR5450. It is very important that you have your serial num-
ber written down before you install the 802.11g Wireless Turbo Multi-function Access Point.
You can find your serial number on the bottom of the Wireless Access Point and on the side
of the package. If you ever need to call our Technical Support department, you will need this num-
ber to receive assistance.
Note: Be sure to find out what letter your CD-ROM drive uses before you begin installing
your new product. You will need to know this to properly install your software.
Step One: Install your software
Note: You will need to install this software on all the PCs or laptops you plan to use to con-
figure the 802.11g Wireless Turbo Multi-function Access Point.
Insert your U.S. Robotics Installation CD-ROM into your CD-ROM drive.
Note: If your CD-ROM does not automatically launch, click Windows Start, Run, and type
D:\setup (or the appropriate letter of your CD-ROM drive) and click OK.
The Installation CD Graphic User Interface (GUI) will appear on your screen. If prompted, select
your preferred language.
Some files will be copied to your system, and then you will be asked to read the license agree-
ment. Read the agreement and click Yes. Select your product and then click Software.
Click Access Point Software. Follow the on-screen instructions and wait for some files to be cop-
ied to your hard drive. A window will appear showing you the files that are being loaded onto
your system. When the Menu screen of the U.S. Robotics Installation CD-ROM returns, close it.
Remove the Installation CD-ROM and prepare to install your hardware.
1