Samsung WF511AB Série Manuel D'utilisation page 36

troubleshooting
CODE SYMBOL MEANING
Sr
OE
E2
tE
3E
2E
7E
AE
SF1
SF2
SF3
SUdS
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
36_ troubleshooting
WF511ABR-03010A-03_EN.indd Sec7:36 WF511ABR-03010A-03_EN.indd Sec7:36
Problem with control.
Water detected over the safe
water level.
Jammed key.
Temperature sensor problem.
Motor problem.
High/Low voltage detected.
Ag+ Kit problem
Communication error between
SUB PBA and MAIN PBA
System error
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back into the operation.
When it finishes washing, "End"
and "SUdS" codes will blink in
turn.
SOLUTION
Call for service.
Call for service
Call for service
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Call for service
Call for service
Call for service
Reduce the amount of detergent you use.
2012-05-04 2012-05-04 7:21:08 7:21:08