Xiaomi YDXJ01FM Mode D'emploi page 5

3. Install and Disassemble
a. Remove the ba ery cover (as shown in the figure), align the ba ery pins with the direction
of the lens, and insert the ba ery. To remove the ba ery, gently pull the handle bar on the
ba ery.
b. Keep the label side of the MicroSD card towards the back of the camera body, and insert
the card into the card slot. To remove the MicroSD card, gently press the top edge of the
card to eject it from the slot.
Press the ba ery cover lock bu on and
push the ba ery cover outwards.
MicroSD Card
Do not damage the handle bar.