Temperature Selection - EXALTA Duecento 90 Manuel D'instruction

GB
2 - Integrated metal support
3 - Operating control indicator
4 - ON/OFF switch
5 - Temperature selector from 60 ° C to 210 ° C
6 - Swivel cord:
7 - Close-iron button
8 - Anti-scald point
ATTENTION
The tubes become hot in a few seconds. Definitely avoid any contact
with the skin between the hot surfaces, especially the ears, eyes, face
and neck after plugging the device into the mains.
Always use the iron on dry hair, also the curling iron gets very hot when
set to maximum temperature and should then be used very carefully
because if you use it incorrectly or at the wrong temperature it can
easily overheat or even burn the hair. When using the iron for the first
time, always select a moderate temperature and do a test on a strand
to verify that the selected temperature is suitable for your hair type.
INSTRUCTIONS FOR USE
Remove the locking block of iron by sliding the button.
Insert the plug into the wall socket and select the desired temperature using
the appropriate adjustment wheel.
The wide range of adjustment (from 60 ° C to 210 ° C) allows easy use of the
product on all hair types even the most delicate or difficult.
Press the on/off button to turn on the product and the red LED will start
flashing to indicate that the iron is heating up.
As soon as the iron has reached the set temperature, the LED will stop
flashing and the product will be ready to use.
Grab a strand of hair and position the iron close to the root, avoiding
getting too close to the scalp. Close the iron lock with slight pressure for a
few seconds. Then position the iron lower, avoid brushing the part that is
already wavy. Do this for the entire length of the lock and let it cool down
completely before modelling.

TEMPERATURE SELECTION

We recommend that you select:
- A low temperature for thin and fragile hair.
12