Schlage Deadbolt BE365 Instructions De Montage page 2

C
Change faceplate, if necessary.
Choose the drawing that matches your door edge. If the hole has no
mortise, change to the circular faceplate.
Door Edge
Door Edge
Install Lock
1
Rotate baseplate cam to correct position.
No change
necessary.
OR
CAUTION
Cam MUST be vertical!
Cam
2
Install bolt.
Actual Size
Bolt must remain retracted
throughout installation!
Retracted
3
Install keypad.
4
Route wire through hole in baseplate.
OR
Wood Block
(Not Included)
CAUTION
Extended
Route wire over bolt.
Slide tailpiece through slot.