Sediment Cup Cleaning - Pulsar PWP20 Mode D'emploi

Operating Instructions & Parts Manual
2 Inch & 3 Inch Water Pump

Sediment Cup Cleaning

O-Ring
Sediment Cup
1. Move the fuel valve to the OFF position, then remove the fuel sediment cup and O-ring.
Warning!
Gasoline is highly flammable and explosive. You can be burned or seriously
injured when handling fuel.
• Stop the engine and keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
2. Wash the sediment cup and O-ring in nonflammable solvent, and dry them thoroughly.
3. Place the O-ring in the fuel valve, and install the sediment cup. Tighten the sediment cup securely.
4. Move the fuel valve to the ON position, and check for leaks. Replace the O-ring if there is any leakage.
20