Kärcher 18/25 Mode D'emploi page 15

The battery pack is equipped with a display. The following
information can be read on the display: Charging state:
Remaining run time
�
Remaining charging time
�
Error messages
�
Error messages
�
Display
Battery pack in storage
Battery pack in use
Battery pack charging
Battery pack charging
Note
New battery packs are only pre-charged and must be fully charged before first use. The display is activated during the first
charging process. New battery packs reach their full capacity after approx. 5 charging and discharging cycles. Charge battery
packs that have not been used for a long time before use. The battery pack cannot be charged outside the permissible tempe-
rature value range. The battery pack display then shows the temperature symbol. If the display does not show anything during
the charging process, please follow the notes in the "Troubleshooting" chapter.
Meaning
Charging state of the battery pack while not in use.
Remaining run time of the battery pack while in use.
Remaining charging time of the battery pack during charging.
The battery pack is fully charged.
Remaining charging time of the battery pack during charging.
The battery pack is fully charged.
Charging process
Operation
Display
Note
The run time adjustment is geneated via capacity
switching!
EN-6
See graphics page for illustrations
Illustration A
Illustration B
Illustration C
Illustration D
Illustration C
Illustration D
15