Operating Tips - SNOWJOE SUNJOE 24V-X2-OGV Manuel D'utilisation

Fig. 8
Handle pivoting
button
m
DANGER!
To avoid personal injury, the handle must be
fully extended in working position during operation.
Operation
Starting + Stopping
Do not switch on the vacuum until it has been completely
assembled.
m
WARNING!
Before switching on the vacuum, make sure
that it is not in contact with any foreign objects. Keep your
hands and feet a safe distance away from the bottom opening.
Failure to comply with these warnings can result in severe
personal injury.
1. Insert the batteries until you hear them click into place, then
close the compartment cover (Fig. 9).
Fig. 9
2. To start the unit, press the safety lock button, and squeeze the
On/Off switch. Once the machine powers on, release the safety
lock button and proceed with operation (Fig. 10).
Working
position
Storage position
Battery
compartment
cover
Battery
Battery
compartment
11
Fig. 10
Safety lock
button
On/Off switch
3. This unit is equipped with a Turbo button that will allow
the vacuum to reach 850 CFM. Press and hold the Turbo
button to activate. Release the Turbo button to turn Turbo
mode off (Fig. 11).
Fig. 11
m
WARNING!
The Turbo button is for short term use only.
Do not use the Turbo function for extended periods of time.
Using this function for an extended time can cause damage.
4. To stop the unit, release the On/Off switch (Fig. 10).

Operating Tips

This cordless vacuum + mulcher is designed to clean hard surfaces
as paved paths, courtyards and terraces. It is only suitable for
vacuuming dry, light materials such as grass, leaves, small twigs and
acorns. The vacuuming of heavy materials such as metal, stones,
branches, broken glass, and wet leaves is expressly excluded.
m
WARNING!
Use the cordless vacuum + mulcher only in
daylight or good artificial light.
• Wear personal protective equipment during your work
session. This includes boots, safety glasses/goggles, ear
defenders, long pants and a long-sleeve shirt.
• Make sure the collection bag is properly installed and
zipped closed.
• To reduce the risk of hearing loss associated with sound
level(s), hearing protection is required.
• Before starting, make sure the handle is securely set into
working position.
Turbo button