Technaxx TX-101 Manuel D'utilisation page 15

Playing in Phono mode (Vinyl)
1. Open the dust cover. Turn the volume knob (4) to turn the equipment on.
2. Set the speed selector to the appropriate position: 33, 45 or 78, depending
on the record to be played.
3. Set the auto stop control to ON if you want the turntable to stop turning
when it has reached the end of the record. If the switch is set to OFF, the
turntable will continue turning at the end of the record.
4. Place the record on the turntable (use the 45 rpm adaptor, if required).
5. Remove the needle protection. Move the lift lever towards the back to raise
the tone arm from the arm park, then slowly move the arm to the record, as
illustrated on the right picture above. The turntable will start rotating.
6. Move the lift lever towards the front, the tone arm will gently drop onto the
record and playback will start.
7. To stop playback, move the lift lever towards the back to raise the tone arm.
The turntable will still be rotating but the record will stop playing. To continue
playback, move the lift lever towards the front.
8. To play a different piece on the record, move the lift lever towards the back,
move the raised tone arm to the start of the piece and then move the lift lever
towards the front to lower the tone arm and start playback.
9. To adjust the volume level, turn the volume knob to the right or left.
10. At the end of the record, move the lift lever towards the back to raise the
tone arm and move it back to the tone arm park, and then move the lift lever
towards the front to lower the arm onto its rest.
11. Alternatively, lift the tone arm off the record and return it to the arm rest
manually.
12. When you have finished playing records, engage the tone arm lock to
protect it from accidental movement. Turn the volume knob switch the unit off.
Unplug it from the power supply if you are not going to use it for a while.
NOTE: Should your record stop before the last track finishes, set the auto stop
control to OFF. Your record will now play to the end, but you will have to stop
the turntable rotation manually. (Return the tone arm to its rest manually and if
the turntable is still rotating, switch off the unit by pressing the volume control
knob. Then set the auto stop control back to ON.)
5