Konwin KPT-5167L Manuel De L'utilisateur page 13

TROUBLESHOOTING
If the heater will not operate, please check the following:
Check if the power cord is plugged into an electrical outlet.
If not, plug the unit into an appropriate outlet.
Check if electricity to the outlet is working.
Ensure power is turned to the ON position.
Make sure the heater is placed on a flat, solid surface.
information.
Check to see if the battery in the remote control is placed
correctly and in working order.
NOTICE
NOTICE
NOTICE
SAFETY FEATURES section for additional
For the heater to function properly, its desired temperature
must be set a few degrees higher than the temperature in
the room. If the unit is not blowing hot air, increase the set
temperature on the heater to engage the heat elements.
It is normal for the heater to cycle ON and OFF as it maintains
the preset temperature.
The product is equipped with a tip-over switch inside.
When the product tips over abnormally during its use, it
can cut off power automatically.
13