Storing And Maintenance - Yard force PHCEG02A Manuel D'utilisation

Risk of injury!
Branches that are high up or under tension can wedge the saw chain in the wood!
Note: when you encounter the cutting wood which is under tension. It requires your special care .
Cutting wood which is under tension can release the tension. Causing the wood to react out of control.
In the worst case this can result in severe and even fatal injuries. This type of work must be performed
only by specially trained persons.
WARNING!
Before performing any repair work, always unplug the plug, switch off the pruner and wait until the saw
chain has come to a standstill.
1. Wear gloves when handling or cleaning the saw chain.
2. Do not spray the unit with water. Ingress of water may destroy and the electric motor.
3. Clean the unit with a cloth, hand brush, etc.
4. Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition; as well
as the cutting attachment and the cutting attachment guard.
5. Replace worn or damaged parts for safety ( e.g. cracks in the saw blade).
Storage:
Clean the exterior of the machine thoroughly using a soft brush and cloth, Do not use water, solvents
or polishes.
Always use safety guard to avoid injuries, when store the device.
Store the machine in a dry place. Do not place other objects on top of the machine.
Transport
Use the original packaging to ship whenever possible.

STORING AND MAINTENANCE

44