Maintenance And Storage - Yard force PHCEG02A Manuel D'utilisation

4. Disconnect the product from the power supply:
a) whenever you leave the product,
b) before clearing a blockage,
c) before checking, cleaning or working on the product,
d) if the product starts to vibrate abnormally.
5. Operate the product only in daylight or in good artificial light.
6. Do not overreach and keep your balance at all times.
7. Always be sure of your footing on slopes.
8. Walk, never run.
9. Keep all ventilation openings clear of debris.
10. Never blow debris in the direction of bystanders.
11. Beware of overhead power lines.
12. Always be aware of falling debris when cutting the higher
sides of branch.

Maintenance and storage

1. Keep all nuts, bolts and screws tight to be sure the product
is in safe working condition.
2. Replace worn or damaged parts.
3. Store the product only in a dry place.
4. Use only spare parts and accessories approved by the
manufacturer.
Residual risks
Even if you are operating this product in accordance with the
provisions, residual risks will always still remain. The following
dangers can arise in connection with the structure and design
of this product:
1. Health defects resulting from vibration emission if the
product is being used over longer period of time or not
adequately managed and properly maintained.
2. Injuries and damage to property to due to broken
37