Led Charging Indicator; Charging The Battery - ATIKA ALG 40-1800 Notice Originale

Status
Standby
Charging process
Full charged
Too hot / too cold
Defect
Use only the matching lithium ion batteries for

charging (see "Using the charger")
The battery is supplied partially charged. Fully charge the
lithium ion batteries therefore before first use and/or after a
longer idle period of the machine.
 Connect the charger plug cable (D) with the charger (A) and
plug the mains cable (C) into the socket.
 Connect the battery (F) with the charger.
Make sure the charge plug has been pushed fully onto the
contacts of the battery.
 Charging process:
The LEDs on the battery flash green and the charge indicator
of the charger is lit green continuously.
18
LED - charging indicator (A)

Charging the battery

red
out
out
out
green
out