Kobalt 0035546 Mode D'emploi page 10

AIR HAMMER :
1. Remove the air inlet protective cap. (See Figure 1)
2. Mount the male plug by hand into the air inlet. (See Figure 2)
3. Place 2-3 drops of air tool oil into the male plug before each use.
(See Figure 3)
4. Insert the chisel into the barrel hole. (See Figure 4)
5. Screw the spring retainer onto the cylinder barrel of tool and firmly secure it.
(See Figure 5)
6. Connect air supply hose to tool. Set the air pressure at 90 PSI.
(See Figure 6)
10
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6