Klarstein GRANDBREEZE ECO Mode D'emploi page 39

Fixing the seal for side-opening windows and roof windows
The installation of the window seal is simple. You can attach the seal to a tilted window,
a side-opened window or a roof window. We have chosen a side-opened window
for demonstration purposes. It is particularly suitable because the exhaust hose can be
attached to the side far down.
The Velcro tape is attached to the three open sides. The side where the window is against
the frame is left out. Clean and dry the window frame beforehand so that the tape
adheres.
1
Attach the Velcro tape on
the left, on the top and on
the bottom of the window
frame.
We recommend that you
cut the tape into strips for
each window side first.
2
Now attach the Velcro
tape to the inner window
sides.
3
Stick the window sealing
to the Velcro strips on
the window frame first
(starting with the top), then
on the Velcro strips on the
window.
Push the exhaust air tube
of the air conditioner
through the hole, which
can be adjusted in height
and size.
EN
39