Other Functions - Tokai TC-139 Manuel D'utilisation

Note:
Some mobile phones may connect and disconnect as you make and end calls.
This is not an indication of a problem with your unit.
DIMMER control
In standby mode, press the DIMMER (1) button allows you to set the brightness
of the LED display to high or low levels.
AUX IN
Requires a 3.5mm audio cable (no included).
1. Connect the 3.5mm audio cable to the Line In on the unit and an audio
output on an MP3 player or other audio source.
2. Press the Source button to switch to Aux In mode.
3. Use the native controls on the connected MP3 player or other audio source
to play and control audio played through the clock radio speaker.
USB CHARGING SOCKET
The USB charging socket (12) of DC 5 V. at the back of the unit allows you to
charge an external device via USB cable (not supplied).
You can charge with a DC 5 V. device max.
For example : your mobile phone (Android ® or Iphone ® are in 5 V. max) and
external device with USB socket of max.
The connector or the USB charging cable are not supplied.
RESETTING
If the system does not respond or exhibits erratic or intermittent operation, you
may have experienced an electrostatic discharge (ESD) or a power surge that
triggered the internal microcontroller to shut down automatically. If this occurs,
simply disconnect the ac power cord and remove the system backup battery,
wait for at least 3 minutes and then setup the unit again as if it is a brand new
unit.

OTHER FUNCTIONS

21