Erase All Paired Profiles; Connecting/Disconnecting Your Handsfree With Bluetooth Equipment - ideus VV900 Manuel D'utilisation

This handsfree can paired with up to 8 Bluetooth equipments (including mobile
handsets). The corresponding 8 sets of pairing information are recorded by
the handsfree. Each paired equipment can wireless communicated with the
handsfree after setting up a Bluetooth connection. Please check Section 2.4.4
on procedures to set up a Bluetooth connection.

2.4.3 Erase all paired profiles

This handsfree can paired with up to 8 Bluetooth equipments. When Handsfree
in the Paring Mode, long press K4, it will erase all paired profiles and quit pairing
mode. At this time, Blue LED gives 1 blink per 3 seconds.
2.4.4 Connecting/Disconnecting your Handsfree with Bluetooth
Equipment
When working with a bluetooth equipment using HFP, your handsfree cannot
communicate with the equipment without bluetooth connection established in
advance.
Connecting your Handsfree with Bluetooth Handset:
Bluetooth connection can be set up by initiating request from either the
handsfree or the handset, detailed operations are as follows:
1. Initiating connection request from the Handsfree: Place the handsfree close
to the Bluetooth handset and then short press K2.
2. Initiating connection request from the Bluetooth handset: Place the handsfree
close to the Bluetooth handset and then follow the handset user guide to find
the handsfree and send connection request.
After connecting, you will hear a connecting tone, and then Blue LED gives 3
quick blinks per 2 seconds
Disconnecting your Handsfree with Bluetooth Handset:
When handsfree connected with bluetooth handset, you can disconnect them
as follows:
1. Long press K2.
2. Refer to handset's manual to initiate the connection from the handset side.
After disconnecting, you will hear a disconnecting tone, and then Blue LED
gives 1 blink per 3 seconds.
Fonexion Manual VV900.indd 11
11
VV900
4/7/07 12:03:51