AKASO P30 Mode D'emploi page 5

Note:
• Email address should be valid.
• The length of password must be within 6-20 characters, no special characters included.
• Please choose the same country in register and login.
• If you forgot the password, click "Forget Password" to reset it.
3. Plug In Your Camera
① Connect the micro USB connector of USB power cable to the power port of the camera.
② Plug the USB-A connector of power cable into the power adapter.
③ Plug the power adapter into a wall outlet and wait for the red indicator light blinking,
you will hear a tone.
Note: If the red indicator light does not blink, please reset it or power it on again.
4. Add Your Camera
① Follow the on-screen instructions to finish the setup to connect your Wi-Fi network.
05
30cm ~ 100cm
② Choose Room, click "Add Device → Video Surveillance → Smart Camera → next
step → Enter Wi-Fi Password → Confirm → Continue".
06