Burg Wächter BURG protect Plug 2141 Notice D'installation Et D'utilisation page 12

Scenario setup
1. Open the device manager by tapping on
the "gearwheel" icon
2. In the device manager, scroll down until
the function group "Scenarios setup"
appears.
3. Select "Autom. functions". The following
options are displayed:
Automatic Functions – Timer
Program timely defined processes.
a. Select "Autom. functions"
b. Add new functions by tapping on the
+ symbol at the top right.
c. Set the time and the repeat option.
Then assign a useful name for the
function, e.g. "Living room lamp on".
Lamp As an option, you can mark the
function in colour.
12 | English
BURGprotect_PLUG2141_03-2019.indd 12
d. Select "System status" > "Function
at the top right:
e. Go back two times with the < arrow
socket PLUG" > and the function
socket with the designation specified
by you that you want to switch. Make
a check in which state (On / OFF) the
function socket should change to.
to the "Add task" menu and save the
entry by tapping on the check at the
top right.
Note: For recurring
time limited
processes, add
one one automatic
switch on and one
automatic switch off
function each per
function socket.
PLUG 2141
10.04.2019 12:15:3