Blueant RIBBON Guide De L'utilisateur page 5

Streaming from Another Phone
In order to stream from another phone you will need to pair the
phone with the Ribbon.
To put the Ribbon back into pairing mode:
1. Switch the Ribbon off (hold down
2. Hold down
fl ashing.
The Ribbon will switch on and go straight to pairing mode,
Follow the instructions above to pair your phone or Bluetooth
streaming device.
Note: When powered on, the Ribbon will try to connect to the
last phone it was connected to. To swap the source phone for
streaming, you need to disconnect the currently streaming
phone, go to the Bluetooth menu on the new phone, then select
the Ribbon and connect.
This enables you to easily switch the Ribbon between phones.
for about 5 seconds, until the LED starts
for about 3 seconds).
5