Zibro SRE 446 E Mode D'emploi page 81

Table des Matières

Publicité

Only the use of the
correct fuel will ensure
safe, efficient, and
comfortable use of your
Zibro.
This transportation cap
is packed separately in
the box. Only this cap
ensures trouble-free
transportation of the
heater after use.
Store it well!
THE RIGHT FUEL
Your Zibro heater has been designed for use with high-quality water-free pure
paraffin oil, such as Zibro Premium Quality Fuels. Only fuels of this kind will ensure
clean and proper burning. Lower quality fuel may result in:
e
increased possibility of malfunctioning
e
incomplete burning
e
reduced heater lifetime
e
smoke and/or smells
e
deposits on the grid or mantle
Using the right fuel is therefore essential for safe, efficient, and comfortable use
of your heater.
Damage and/or malfunctions of the heater due to the use of other than high
quality water-free pure paraffin oil is not covered by the warranty.
Always refer to your local Zibro dealer for the right fuel for your heater.
ManUal
A
INSTALLING THE HEATER
1
Carefully remove your Zibro from the box and check the contents.
In addition to the heater you also need to have:
e a manual fuel pump
e a transportation cap
e these directions for use
Keep the box and the packaging materials (Fig. A) for storage and/or
transportation.
2
Open the lid of the removable tank D and remove the piece of cardboard.
3
Fill the removable tank as indicated in Section B.
4 The floor should be firm and completely level. Reposition the heater, when it
is not level. Do not try to correct the situation by placing books or other
goods under the heater.
A
e
e
e e e e
4
77

Publicité

Table des Matières
loading

Table des Matières