Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
BRO I L
1 .
Place wire rack or baking pan in the upper rack position .
2 .
Slide the baking pan under the wire rack to catch drippings during broiling .
3 .
Select the BROIL function . The oven will default to 450˚F . NO PREHEAT, and
CONVECTION are not available on the BROIL setting .
4 .
If needed, turn the TIME knob to set cook time .
5 .
Press the Time knob (I/O) to begin broiling .
Note: For best results when broiling meat, turn over the meat half-way
through broiling.
6 .
There will be 3 audible beeps once the broiling cycle is complete . The oven will
stop heating .
7 .
Unplug the appliance when not in use .
R OAST
1 .
Place wire rack in the lower rack position .
2 .
Select the ROAST function using the function knob . NO PREHEAT, and
CONVECTION are not available on the ROAST setting .
3 .
Turning the TEMP knob, adjust temperature to desired temperature .
4 .
Turning the TIME knob, adjust time to set cook time . You may choose STAY ON
so the oven does not stop cooking until you press I/O . To choose STAY ON,
turn the time knob counterclockwise past 0 (zero) until you see "ON" .
5 .
Press the Time knob (I/O) to begin preheating .
6 .
The temperature display will blink while the oven is preheating .
7 .
Once the oven has preheated, you will hear 2 audible beeps and the time set
will automatically begin counting down .
8 .
Place food (on rack or pan) in the lower rack position .
9 .
There will be 3 audible beeps once the baking cycle is complete and the oven
will stop heating .
10 . Unplug the appliance when not in use .
Note: When cooking meat, use a meat thermometer to test for doneness by placing
the thermometer in the thickest part of the meat.
10
Publicité
Chapitres
Table des Matières
