Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FUNCTION (only when the operating device is discon-
nected, only for qualified electricians)
ROLLER SHUTTER/BLIND, DRIVE CONTROLLER/ GROUP CONTROLLER,
RUNNING TIME
(Selection of shutter/blind, selection of the drive controller/ group controller,
running time of the roller shutter/blind)
Press the MENU button.
1.
2.
To select the FUNCTION menu, press the + button until FUNCTION ap-
pears.
Confirm by pressing OK. ROLLER SHUTTER/BLIND will appear.
3.
You can select either roller shutter or blind using the +/- button.
4.
5.
Confirm by pressing OK. DRIVE CONROL DEVICE/GROUP CONTROLLER
will appear.
You can select the control device required using the +/- button (DRIVE CON-
6.
ROL DEVICE/GROUP CONTROLLER).
7.
Confirm by pressing OK. RUNNING TIME will appear.
You can set the required running time using the +/- button. (Pre-setting: 120
8.
seconds for roller shutters and 180 seconds for venetian blinds).
9.
Confirm by pressing OK.
10. The RUNNING TIME function has now been set.
11. Please read on for further programming options using the FUNCTION
menu.
de
en
fr
nl
63
Publicité
Table des Matières
