Becker TC52 Notice De Montage Et D'utilisation page 54

Assembly and Operating Instructions
PROGRAMME
PROG1/INDIVIDUAL WEEK (Individual switching time st for week)
PROG1/INDIVIDUAL BLOCK (Individual switching time st for block1/2)
PROG1/INDIVIDUAL INDIVIDUAL (Individual switching time st for individual
day)
1. Press the MENU button.
2. To select the PROGAMME menu, press the
+ button until PROGAMME appears.
3. Confirm by pressing OK. PROG1 will appear.
4. Confirm by pressing OK.
5. Press the + button until INDIVIDUAL appears.
6. Confirm by pressing OK.
7. Now select the PROG1 INDIVIDUAL function you require using the +/- but-
tons:
INDIVIDUAL week
Press OK for the WEEK menu level (1-7). All further entries now refer to every
day of the week.
INDIVIDUAL block
Press OK for the BLOCK menu level (BLOCK 1 1-5, BLOCK 2 6,7). All further
entries now refer to BLOCK 1 (1-5) and BLOCK 2 (6,7).
INDIVIDUAL individual
Press OK for the INDIVIDUAL menu level (1,2,3,4,5,6,7).
All further entries now refer to every individual day of the week.
8. Now set the SWITCHING TIME s and the SWITCHING TIME t using the +/-
buttons. Confirm your entry by pressing OK.
9. Press the MENU button to switch to operating mode.
54