Toastess TFC-311 Mode D'emploi page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TFC-311 Booklet v4.qxd
3. Swivel the Water Spreader to the left. Remove the Permanent Coffee Filter
and fill with 1 - 2 tbsp. (15 - 30 ml) of ground coffee for 'drip coffee makers'.
Return the Water Spreader to its original position and close the Cover.
4. Plug unit into a 120 Volt A.C. outlet.
5. Press the On/Off Switch to the 'On' position and the Indicator Light
will illuminate.
6. Once the coffee has finished dripping into the mug, press the On / Off
Switch to the 'Off' position.
7. Unplug unit from outlet or follow directions above to prepare another
cup of coffee. Be careful when opening the Reservoir Cover when the
unit it hot.
How to Heat Water for Tea, Hot Chocolate, etc.
1. Fill the water reservoir with fresh cold water (maximum 10 oz./300 ml).
NOTE: The Mug can be used but we suggest that you then run the mug
under hot water so the mug is not cold. Dry the Mug. NOTE: There is a
MAX fill line inside the Water Reservoir. Do not fill past this level.
2. Swivel the Water Spreader to the left and remove the Permanent Coffee
Filter. Return Water Spreader to its original position.
3. Place a tea bag, hot chocolate, or instant foods etc. in the Mug.
Place the Mug under the Dispenser.
4. Plug unit into a 120 Volt A.C. outlet.
5. Press the On/Off Switch to the 'On' position and the Indicator Light
will illuminate.
6. IMPORTANT: Once the water has finished dripping into the mug, press
the On/Off Switch to the 'Off' position.
7. Unplug unit from outlet or follow directions above for more hot water.
Be careful when opening the Reservoir Cover when the unit it hot.
11/04/05
11:05
Page 10
4

Publicité

Table des Matières
loading

Table des Matières