Product Operation; Boundary Markers - Proscenic BL828 Mode D'emploi

Product Operation

a.Before you set a schedule, you first need to set the current time on robot,
make sure the robot is on or charging, hold down the "CLOCK" button until
the numbers on the screen flash, press the arrow keys (up / down to increase
and decrease numbers, left / right to toggle between hours and minutes to
set the current time and press "CLOCK" again when done).
b.Hold down the "PLAN" key until the numbers on the screen flash, press the
arrow keys to set hours and minutes, and press ON / OFF when done.
c.When the schedule is successfully set, a "Schedule confirmed" sound will be
heard and a small alarm will be shown on the screen.
Attention: The figures shown during the setting of a schedule are not the exact
time when the robot starts to clean, but the hours after which the robot starts
automatically, eg The current time is 08:00, you have a schedule set successfully
with 01:00, then the robot will work after one hour, namely at 09:00.
Cancel Schedule
Hold down the "PLAN" key, press the arrow keys, set the schedule to 00:00, then
press ON / OFF, if the schedule is successfully canceled, a "No Schedule"
sound will be heard.

Boundary Markers

Proscenic Boundary Markers let you decide where your
accessory can go and where it should "keep out." Easily
cut the magnetic strip to fit doorways, around pet bowls,
cords, or anywhere you don't want 811GB robot to go.
Contains 3.25 feet (1 meter) of boundary markers.Only
Boundary Markers
compatible with Proscenic 811GB.
Note:The Boundary Marker need to be laid flat on the ground.
7