Getting Started; Contents Of Carton; Safety Cut-Off - Xaralyn Levico Manuel

Getting started

• Remove the appliance from the box.
• Remove any packaging from the product.
• Place the packaging inside the box and store in a dry place.
• Mount the fireplace. Then plug the power cord into a 230-volt earthed socket.

Contents of carton

• Fireplace.
• Remote control.
• Instruction Manual.
Operation
The fireplace can be controlled with the panel on the unit or with the included remote control.
Main Switch
The Main Switch is located on the fireplace. Turn the switch to "I" to connect power and turn the
switch to "O" to cut the power. There will be chiming sound when turning to "I".
Power on/off
Push the button once to turn on power for all functions. Then touch the button once more to
turn all functions off.
7
24
Flame intensity
Push the button to level up/down to the desired flame intensity.
Change the desired Temperature
7
24
Press the button to change the temperature of the thermostat. We recommend setting the temperature
high. This way you can turn on the heating settings at any time. The heater will turn off when the desired
7
24
temperature is reached.
Heat settings fireplace
This fireplace consist of a fan forced electric heater with two heat levels. Push the
activate the heater at low level. Push the
set in high level, push the button once more to deactivate the heater.
7
24
Heater will only work if the thermostat is set on a higher temperature than the current room temperature.
7
24
Note: The fan will continue to run for a short time and turn off automatically after the heater is turned off.
Time setting
Press the key to enter the current time setting. The light of a specific day will light up and flash. Press
7
24
to select which day of the week. After the selection is complete, press
by pressing or , press to confirm. After the setting is complete, press
7
24
Change C/F
Press the C/F button to change from Celsius to Fahrenheit
button once to
button once more to active the heater at high level. When
7
24
to confirm. Enter the current time
7
24
to exit the time setting.
7
24
Daily timer
Press to enter the daily timer function, the timer light and setting light will flash, press
7
24
the daily timer. The timer lights up when the weekly timer is turned on. After setting the daily timer on, press
the button to enter the Monday timer. Press
7
24
is set, press to enter the minute setting of this day. Press
7
24
this day. After the hour is set, press
is completed, press
24
completed.
Open window detection
When the heating function is turned on, the indoor temperature rises. When the temperature reaches the set
temperature, the product automatically remains at this temperature. If the indoor temperature is lowered by 5
°C or more within 10 minutes, and this trend is maintained or continued for 30 minutes, the product self-test
system detects that a window has been opened, and the self-test system will automatically turn off the heating
function.
Press and hold the key to display E0. When E0 is displayed, you can press
cycles. E0 means that the window detection function is not turned on. E1 means the window detection function
is turn on.

Safety cut-off

• This appliance is fitted with a safety cut-off which will operate if the fireplace heater overheats (e.g. due to
blocked air vents). For safety reasons, the fireplace heater will NOT automatically reset.
• To reset the appliance, disconnect the appliance from the mains supply for at least 15 minutes.
Reconnect the supply to the mains and switch on the appliance.
Cleaning
Warning: The unit must be unplugged from the power supply prior to any maintenance or cleaning in order to
reduce the risk of electric shock or fire.
General cleaning instructions
• The housing may be wiped with a slightly damp, lint-free cloth. Do not use any abrasive scouring pad or
steel wool.
• Do not use detergents or cleaning products.
• If necessary, dust particles accumulated in the air outlet openings may be removed with a vacuum cleaner.
Protection of the environment - directive 2002/96/EC
In order to preserve our environment and protect human health, the waste electrical and electronic equipment
should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason your appliance should not be disposed of as unsorted
or
municipal waste. The user has the right to bring it to a municipal collection point performing waste recovery by
means of reuse, recycling or use for other applications in accordance with the directions.
The warranty for your product is valid for two years from the date of purchase.
or to enter the hour setting of this day. After the hour
to enter the hour of the shutdown time of
7
24
to enter the minute of the shutdown time of this day. After the setting
7
24
to enter the clock setting of the next day. Carry on until the whole week has been
7
or to select
or , to select the E0 and E1