General Information; General Safety Instructions - REV Ritter FLEX POWER 10 Mode D'emploi

Masquer les pouces Voir aussi pour FLEX POWER 10:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

GB
Flex Power 10
Assembly and operating instructions
INTRODUCTION
Dear Customer,
We'd like to thank you for purchasing our product. Please read the following operating instructions thoroughly
before using this product for the first time and keep it handy for future reference (S1).
Please check the product before use for any damage.
PROPER USE
• The product conforms to the appropriate European CE directives (S2).
• This product conforms to the appropriate European safety standards.
• The product is IP20 rated and suitable for use in dry interior spaces (S3).
• The product is intended exclusively for household use or similar purposes. It must not be used for commercial
purposes!
• The product may only be used only for the purpose for which it is intended, in accordance with this user manual!
• The product is not suitable for rough use (e.g. construction sites)!
• The product is not intended for use by persons (including children) whose physical, sensory or mental abilities
are limited or who lack experience and knowledge! These persons may only use the product if they are
supervised by a person responsible for their safety, or if they have been inducted into how to use the product!
The supervision and use of this product must be carried out by a responsible person!
• The product is only designed for use with the appropriate batteries.
• The USB ports are only suitable for the charging of smartphones, for instance. A transfer of data is not possible
by this means.

GENERAL INFORMATION

• Only use the supplied original parts!
• This product has no replaceable parts. Do not attempt to open or repair this product!

GENERAL SAFETY INSTRUCTIONS

• Please observe the technical specifications!
• Please follow this instruction manual and keep it in a safe place!
• Please pass on this instruction manual to a subsequent owner!
• Not to be used by children!
• Do not operate a defective product!
• Never look directly into the LED light source! The light spectrum transmitted may contain blue components (S4).
• Must not be used in areas that represent an explosion hazard (e.g. carpentry workshop, paintshop, or similar)!
• Do not use in the immediate vicinity of flammable materials!
• Do not immerse in water or other liquids!
• Do not operate with wet hands!
• The light source in the luminaire is not replaceable. The entire luminaire must be replaced at the end of its
service life!
• Never undertake repairs yourself. Repairs may only be carried out by the manufacturer or an authorised service
representative.
• Do not open the housing!
• Only a regular mains socket (230V~, 50 Hz) of the public supply network may be used as a voltage source for
the power supply unit.
• If the cable is damaged, disconnect product from the power supply!
• Do not operate the product at, on or in the vicinity of open flames (e.g. candles)!
• Do not bend using force!
• Only use this USB port for IT devices!
• Do not use the product during the charging process.
• Do not overcharge, disconnect the product from the charging cable after maximum 12 hours!
• Close the cover of the charging socket after charging!
SAFETY INSTRUCTIONS FOR BATTERIES
• Do not attempt to revive batteries or rechargeable batteries by heating or similar measures. Primary batteries
must not be recharged as this can lead to electrolyte leakage, explosion or fire.
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

L18770s

Table des Matières