Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Hob burners
To adjust the minimum level:
•
Light the burner
•
Turn the knob to the position of the
minimum flame;
•
Remove the knob;
•
Unscrew or screw the by-pass screw (on
the right above of tap shaft or below of tap
shaft) until a regular small flame is
reached.
•
For LPG screw completely the by-pass
screw.
Reassemble the parts following the same
procedure in reverse.
Check that, when turning the knob quickly from
the maximum position to the minimum one, the
flame does not go out.
Oven burner
To replace the gas oven nozzle, follow this
procedure:
•
Check the table no.1 for diameter of
nozzle;
•
Remove the oven removable base panel
A;
•
Remove the screw B on the oven burner;
•
Remove the oven burner by pushing it
backwards.
•
Replace the nozzle "C" by means of a No
10 socket spanner;
Reassemble the parts following the same
procedure in reverse.
20
by-pass
Publicité
Table des Matières
