Mounting - Hella eAZD RTK-QS Instructions De Montage

Mounting

Remove the backing from the
adhesive strips and attach the
eAZD to a pre-cleaned spot or
insert it in the retaining frame
no. 8HG 863 383-001.
If the cables are to be fed out
at the side, break out the
housing at the marked spots.
The full adhesive strength is
reached after approx. 72 hours.
Do not use at below-zero
temperatures!
Make sure you have enough
room for the plug connection.
The cables may not be bent
or pinched.
Disconnect the vehicle battery
before beginning Mounting
work.
19