JBL TempSet basic Instructions De Montage page 6

TempSet basic
TempSet angle
for terrariums
• Suitable for spotlights, incandescent lamps, compact fl uorescent lamps and heat lamps
• Preassembled, no electrical work required
• The socket is made of high temperature-resistant material up to 270 °C tested in outer space
• Quality switch for 250 W
• TempSet angle: Comes with a stable joint to permit stepless adjustment of the angle of the
lamp up to approx. 60°.
TempSet basic contents:
E27 high temperature-resistant special socket with a threaded tube, a 1.5 m cable and switch,
preassembled.
TempSet angle contents:
E27 high temperature-resistant special socket with a threaded tube and joint, 1.5 m cable and
switch, preassembled.
Suitable for:
1. Filament lamps up to 250 W (incandescent lamps, halogen lamps, UV spotlights only in a
vertical position)
2. Heat lamps without light emission up to 450 W (e.g. JBL ReptilHeat)
3. All compact incandescent lamps with an E27 thread.
Mounting instructions:
What you will need:
A power drill or a rechargeable screw drill with 4.5 and 8 mm HSS drill bits, a jig saw with a
E27 Lamp Kit
Jointed E27 Lamp Kit
UK