Chart Of Clearances - Heartland Oval 1902 Instructions D'installation Et D'opération

Status Model A B C D E F G H J Measure
SweetHeart
NO HEAT
SHIELD
Oval
SweetHeart
WITH HEAT
SHIELD
Oval
*Note: A chimney approved to ULC standard S629 in Canada or UL 103HT in the U.S. must be used to connect the smokepipe at
the top of the cabinet to maintain the 2" (5.08cm) clearance to combustibles. The approved chimney must extend 1" (2.54cm) below
the heatshield. PLEASE NOTE: That these are factory recommended clearances only, and are subject to local, provincial or state
building and fire codes. These clearances may change without notice

Chart of Clearances

25 69 66 66
10 27 26 26
25 68 66 91
10 27 26 36
25 8 66 61
10 3 26 24
25 8 66 91
10 3 26 36
When a heat shield is installed dimensions B, D, E and F are taken from
the heat shield.
Dimensions A, C, G, and H remain the same with or with-out a heat
shield.
Dimensions A and C are taken from the reservoir on reservoir models.
When two or more clearances to combustible walls contradict each other,
the clearance with the greater numerical value must be maintained.
12
50 58 132 61
20 23 52 24
50 86 132 61
20 34 52 24
5 31 132 61
2 12½ 52 24
5 44 132 61
2 17½ 52 24
121 Centimeters
48 Inches
121 Centimeters
48 Inches
121 Centimeters
48 Inches
121 Centimeters
48 Inches