Installation Method - Papago GoSafe 318 Mode D'emploi

Installation Method

1.Connect the holder hooks with the holder clip. (Two options are provided: Short and long
holders for different angles of the windshield. Choice is yours)
2.It is best to place in the center of the windshield area behind the rearview mirror. You can
still easily adjust the capture angle.
3.Remove the red protective sticker. Affix the clip mount on the windshield in a suitable
position so that the lens is facing the windshield. (Do not move for at least 24 hours.)
4.Adjust the lens so that it is inline with the front of the car.
5.Connect one end of the DC adapter to the cigarette lighter socket and the other end to the
Mini USB port on the Dashcam.
English 8
①
② ③
④