Main Features - Audio-Technica AT-LP60-BT Manuel D'installation

Main Features

Figure 1
Front
SPEED 33
45
4
START BUTTON
1
Engages the motor/platter and begins automatic operation.
STOP BUTTON
2
Disengages the motor/platter and returns tone arm to rest.
TONE ARM LIFT BUTTON
3
Lifts and lowers tone arm for manual selection.
PLATTER SPEED BUTTON
4
Select 33 RPM (button in high position) or 45 RPM
(button in low position) platter speed.
WIRELESS FUNCTION BUTTON (with Indicator LED)
5
Use to perform initial pairing with a Bluetooth receiver device
(speakers, headphones, receiver, sound bar, et al.) and to start/stop
wireless signal transmission.
SIZE SELECTOR
6
Select the size of the record: 12" or 7".
PLATTER
7
Aluminum platter mounts directly to center spindle/
motor shaft.
* Illustration shows platter with turntable mat placed on top of it.
CENTER SPINDLE
8
Centering pin for record positioning.
4
START
AT-LP60-BT
WIRELESS TURNTABLE
1
10
9
7
8
5
SPEED 33
45
12" SIZE
7"
11
Back
STOP
ANALOG
PHONO LINE OUT
2 3
45-RPM ADAPTER (shown in receptacle)
9
Adapts 7" records with large center holes to fit center spindle.
SPEED 33
45
DUST COVER HINGE HOLDERS
10
Attachment points for removable hinged dust cover.
AT-LP60-BT
WIRELESS TURNTABLE
DUST COVER
11
TONE ARM/HEADSHELL ASSEMBLY
12
Tone arm is permanently attached to the headshell
assembly.
STYLUS ASSEMBLY
13
STYLUS ("NEEDLE")
14
STYLUS GUARD
15
PRE-AMPLIFIER SELECTOR SWITCH (PHONO/LINE)
16
(On back of turntable) Use PHONO setting when you connect to
the phono input on your home stereo via output cable. Use the
LINE level when you connect to CD/TAPE/AUX inputs of your
home stereo via output cable.
ANALOG OUT
17
Use this output to connect to your home stereo or powered
speakers via the included 3.5 mm stereo mini-plug to dual RCA
output cable.
ANALOG
PHONO LINE OUT
16 17
10
12
6
12" SIZE
7"
AT-LP60-BT
WIRELESS TURNTABLE
START STOP
13
15
12" SIZE
7"
START STOP
14