Télécharger Imprimer la page

ACME CarcamOne V2 Manuel page 10

Publicité

Charge the CarCamOne
The charging starts on its own by connecting the CarCamOne with the PC or when installed inside the car.
It will take approximately 3 hours to charge the CarCamOne. When connected to the PC the display will indicate the modes "
" or "
" while
charging. The battery status can be found in the menu indicated in percent as follows:
,
,
.
Recharge the camera when "
" is displayed or does not turn on.
The modes
Video recording [
]
The recording takes place with 28 pictures per second (28 FPS) with 640x480 px and a consumption of storage of approx. 50 MB/min.
Recording is indicated by running dots"
". FPS rate can be reduced by a dark or indoor environment.
Video endless [
]
Recording as above – however the free storage (min. 200 MB) of the SD-card is shared and the old part will be overwritten consecutively.
The recording will be stopped not until the shutter button [2] gets pressed.
Photo [
]
The recording takes place with 640x480 px, one photo needs approx. 100 KB storage on the SD-card.
The CarCamOne indicates the recording with a frame„
".
Photo endless [
]
With an interval of 4 seconds the CarCamOne takes pictures.
The recording will be stopped by pressing the shutter button [2], or when the SD-card is full.
Spy video [
]
EL modo soplón permite realizar grabaciones escondidas. La grabación va a ser activada hasta que algo o alguien se encuentran delante de la
cámara. Una vez la tarjeta llena, la grabación va a pajar.
Spy –video endless [
]
Recording as above – however the free storage (min. 200MB) of the SD-card is shared and the old part will be overwritten consecutively. The
recording will be stopped not until the shutter button [2] gets pressed.
Audio recording [
]
Records audio only.
Download and coevally charging [
]
Connection to the PC in drive mode. CarCamOne will be charged coevally when connected – charging will take approximately 3 hours.
Web Camera [
]

Publicité

loading