Starrett 647 Série Guide D'utilisation page 2

647 and 647M Dial Comparator Gages are precise instruments that
provide exceptionally accurate length comparison measurements. We
recommend you read this User Guide before using the gages.
Proper Care
Clean the spindle with a lint-
free dry cloth to remove any
dirt after each use. When not in
use, store the gage in its box
and in a dry location at ambi-
ent temperature.
DO NOT oil the spindle!
Gage Mounting
The 647 has a stem diameter
of 3/8" and may be clamped
to holders, ixtures and stands
with a 3/8" bore diameter.
The 647M has a stem diameter
of 8mm and may be clamped
to holders, ixtures and stands
with a 8mm bore diameter.
For additional mounting lex-
ibility, 647 Series gages can
be itted with a lug-on-center
back (PT15052),
separately.
Adjustments
Once the gage is setup and securely clamped, zero to the required
height with a master such as a gage block. Mount the gage so that the
hand is close to zero on the dial.
To precisely zero the gage, remove the safety cap and access the
knurled ine adjustment screw. Turn clockwise or counter-clockwise as
needed to position the hand at precisely zero.
Safety Cap
Tolerance
Screw for
cable release
Contact point
available
Markers
Stem
Spindle