Onkyo NCP-302 Mode D'emploi page 21

Initializing the unit (the settings are
∫
initialized)
When you initialize, network settings and pairing
information will also be initialized, so we
recommend that you note down your settings
before initializing.
1
While the power is on, press ON/STANDBY
while pressing INPUT.
0 The indicators go out and the unit is
initialized.
If the power goes off suddenly
∫
The power may turn off suddenly when the
protection circuit in the unit functions. If this
occurs, unplug the power cord, then reconnect
and turn the unit on again. If the power turns off
repeatedly, unplug the power cord and contact
the place of purchase.
When the power of other units cannot
∫
be turned on with the app
To turn on Onkyo devices connected to the same
network as this unit using the app, you first need
to enable the network standby settings on those
devices.
EN
21