Anti-Icer Tank Preparation - Ossian LS Liquid Spreader Manuel D'assemblage Et D'utilisation

Use of unapproved chemicals
will void equipment warranty.
1)
Attach supplied siphon cap to full tank of Ossian approved
liquid anti-icer. Hand tighten.
2)
Install full anti-icer tank into tank cavity of sprayer with
.
cover of unit closed
Use proper lifting technique when lifting full liquid tank.
A full tank can weigh up to 60lbs.

ANTI-ICER TANK PREPARATION

The Ossian LS® Liquid Sprayer uses a standard Ossian 5 gallon tank as its liquid tank.
An empty tank was provided with the unit. To begin operation, a full tank is required.
3)
Plug female connection on siphon hose into male inlet port in
back of tank compartment. Apply gentle back and forth twisting
motion.
4)
When removing tank, unplug female connection on siphon hose
from base unit prior to lifting tank.
DO NOT attempt to open cover to remove tank.
www.ossian.com |
11