Battery Installation - Ossian LS Liquid Spreader Manuel D'assemblage Et D'utilisation

BATTERY INSTALLATION

Battery is shipped uninstalled from unit.
Battery can be found boxed, inside tank cavity of the OSSIAN LS®.
1)
Lift orange cover from rear catch and pivot forward
providing access to battery cover and battery compartment.
2)
With a Phillips screwdriver unscrew battery cover and rotate
out of position to expose battery compartment.
3)
Inside battery compartment find battery leads and extend
above opening to compartment.
| OSSIAN
8
4)
Connect battery leads from battery compartment to
corresponding terminals on battery.
Connect Black Lead to Black Terminal.
Connect Red Lead to Red Terminal.
5)
Install battery into compartment using care not to pinch
wiring harness and screw battery cover shut.