Introduction; System Characteristics; Installation With 'Stadio Plus' Panels - golmar Stadio Plus T4502SEML Manuel D'installation

INTRODUCTION

First of all we would like to thank and congratulate you for the purchase of this product
manufactured by Golmar.
The commitment to reach the satisfaction of our customers is stated through the ISO-9001
certification and for the manufacturing of products like this one.
Its advanced technology and exacting quality control will do that customers and users enjoy with
the legion of features this system offers. To obtain the maximum profit of these features and a properly
wired installation, we kindly recommend you to expend a few minutes of your time to read this manual.

SYSTEM CHARACTERISTICS

O
Stand alone access control module with proximity reader.
O
Compatible with ISOPROX ISO cards and KEYPROX key holders.
O
Up to 600 users in one or several memory addreses.
O 1 single shoot output relay, NO or NC selectable.
O Programmable activation time.
O Input for external push button activation.
O
12Va.c. and 18Vd.c. inputs.
O
Possibility to be combined with any of the 'Stadio Plus' system installations.

INSTALLATION WITH 'STADIO PLUS' PANELS

O
When combined on 'Stadio Plus' door panels, follow the assembly instructions supplied with the
door panel. Wire and program the access control module as it's explained in this instructions
manual.
INDEX
Introduction........................................25
System characteristics ..........................25
Installation with 'Stadio Plus' panels .......25
Index .................................................25
Module installation......................26 to 27
Module description..............................28
25
Module programming..............................
Programming mode ..........................29
Users management ...........................30
Programming code modification.........31
Time activation modification...............32
Lock release installation..........................32
Installation diagrams ...............................
Standalone operation..........................33
Combined on 'Stadio Plus' panels...33 to 35
26
E
mbedding box positioning.
1650
The upper part of the module should be placed at 1,65m. height roughly.
The hole dimensions are: 125(W) x 140(Al) x 57(D) mm.
The module has been designed to be placed under most of the environmental conditions.
However it's recommended to take additional cautions like rainproof covers.
Break the bottom flange
to pass the cables through.
MODULE INSTALLATION
1850
1450
P
reparing the embedding box.
Pass the wiring through the hole made in
the bottom part of the embedding box.
Level and flush the embedding box.
Once the embedding box is placed,
remove the protective labels
from the attaching door panel holes.