Westinghouse WKCPPC100 Instructions page 3

21. Caution: Ensure the lid of the pressure cooker is removed when using the Fry or
Saute preset program.
22. Never use the pressure cooker without the inner pot (8).
23. Warning: Only operate the halogen lid (13) with the support ring (12) and inner
pot (8) on a heatproof mat. Never operate the halogen lid (13) on the electric
base unit (7) of the pressure cooker. Failure to follow this warning may cause
damage to the appliance, fire, electric shock or serious injury.
24. Always place a high grade heatproof mat (not provided) under the inner pot (8)
of the halogen baker to protect the countertop surface and prevent the risk of
a fire. The inner pot becomes hot during and after cooking. Never operate the
halogen baker without a heatproof mat.
25. The inner pot, accessible surfaces and heating element of the halogen baker
become hot during use. Always use oven mitts, pot holders or fetch tools when
touching hot surfaces or handling hot accessories.
26. Do not immerse the base unit (7) and the halogen lid (13) in water, as they
contain electrical components and heating elements. Do not rinse under the tap.
27. Do not under any circumstances attempt to repair the appliance yourself. For
servicing and repairs, contact our after-sales service team to arrange a repair or
replacement.
28. Never connect this appliance to an external timer switch or separate remote-
control system.
29. The use of accessory attachments not recommended by the appliance
manufacturer may cause injuries.
30. Do not use the inner pot (8) on a stovetop or burner, as it is made specifically
for the base unit (7).
31. Do not put frozen substances into the appliance or wash the inner pot with cold
water when it is very hot.
32. The outer surfaces and inner pot of the appliance may become hot during use.
Wear oven mitts or use fetch tools when handling hot components or touching
hot surfaces.
33. Do not use the halogen baker near the pressure cooker. The heat generated by
the halogen baker will melt the plastic parts of the pressure cooker.
Power supply
1. Before connecting the appliance to a power socket, check that the voltage
indicated on the appliance rating label matches the voltage of your local mains
supply.
2. The power plug is used to disconnect the appliance from the mains. Please
ensure that the power plug is in an operable condition.
3. Removing the power plug is the only way to completely separate the appliance
from the power supply.
4. Disconnect from the power supply by pulling the power plug instead of the
power cord.
5. Do not use an extension cord with the appliance.
6. Keep the power cord away from hot surfaces. Do not plug in the power cord or
operate the appliance with wet hands.
7. Always attach the power cord to the appliance first, and then plug the power
cord into the wall outlet. To disconnect, power off the appliance first before
removing the power cord from the wall outlet.
8. Disconnect the power plug when the appliance is not in use, in case of
malfunctions, prior to attaching accessories and prior to cleaning.
EN
3