Treatment Techniques; Getting Started - Philips Cellesse HP 5230 Mode D'emploi

How to get the best from Cellesse
Please read the instructions carefully - they are designed
to help you get the best possible results.
Cellesse has been designed to be used specifically on the
upper legs and buttocks where most of the Cellulite is
located. We advise not to use Cellesse on the face, the
belly or breasts as these areas are more tender.
Frequency of use
• The ideal frequency of use is every second day. Allow
10-15 minutes for each affected area for the best
results.
Intensity
• Begin each course of treatment on Level 1. During the
massage and in subsequent sessions you can gradually
increase to higher intensity levels as the skin will get
more and more used to the treatment. In this you
should establish your own preference as each skin is
different.
• There is no need to apply hard pressure when using
Cellesse. Simply let the appliance run over the skin
and do the job for you.
Skin Preparation
• Your skin must be clean, dry and completely free from
grease or any other skin preparation.
• (Cellulite) creams, lotions, talcum powder or any other
preparation you normally use can be applied after
treatment.

Getting Started

Insert the appliance plug into the connector.
Insert the transformer plug into the wall socket.
Set the on/off switch to Level 1 (or the level you are
using).
14

Treatment Techniques

Comfort is an important part of Cellesse treatment.
Try sitting ...