Romus D-30L Mode D'emploi page 15

Déshumidificateur « D-30 L »| Rèf. 194330
TIME: Timer key Setting time to shut off or start on.
Setting time to shut off: setting time to shut off by press the "Time" key when the machine is running.
Press "Time", "TIME OFF" display on LCD light flash, each press "+", the time increase half an hour,
each press"-", time decrease half an hour. The time setting range circulates from 0.5-140 hours. When
setting time is 0, timing setting is canceled. The display on LCD shows current time if without
operation in 5 seconds.
Setting time to start on: setting time to start on by press the "Time" key when the machine is stop.
Press "Time», the "TIME ON" display on LCD light flash, each press "+", the time increase half an
hour, each press"-", time decrease half an hour. The time setting range circulates from 0.5-140 hours.
When setting time is 0, timing setting is canceled. The display on LCD shows current time if without
operation in 5 seconds.
"+" key ：means humidity up, press "+" key each time, the set humidity increase for 1%. Press "+"
key continuously, the set humidity increase by 5% per second. When you set the humidity, the
humidity display on LCD light flash, it will shows the current humidity if without operation in 5 seconds,
the humidity display on LCD light on.
"-" Key ：means humidity down, press "-" key each time, the set humidity decrease for 1%. Press "-"
key continuously, the set humidity decrease by 5% per second. When you set the humidity, the
humidity display on LCD light flash, it will show the current humidity if without operation in 5 seconds,
the humidity display on LCD light on.
Accumulative work time key: press the accumulative work time key, time display light flash, the unit
come into current time setting.
Press "+" or "-" key to set current time, press "+"or "-" key each time, time increase or decrease for
one minute. Press "+"or "-" key continuously, time increase or decrease for ten minutes. The time
display shows current time if no operation after 5 seconds, time display light on. Press "Accumulative
work time key" for 3 seconds, the current time on LCD turn to accumulative work time, and then turn
back to current time after 30 seconds.
3. Instruction of function mode
Unit makes a sound "di" when power on, switch button on humidity mode. The indicator light of
"Dehumidify icon" on. Default setting is humidity 30%, machine's dehumidifying range is 30%-90%,
use "+" and "-" key on panel to adjust humidity setting. If keep pressing"-"key when setting humidity is
30%, unit come into continuous dehumidify mode, humidity display on LCD is "CO". The humidity%
flash when setting humidity, then display room air humidity after 5 seconds.
15